Georgia's Department of Public Health says indoor air quality is not a regulated program, and that mold inspections, testing or remediation practices have no enforceable state or federal standards. That puts the EPA's advice front and center: dry water-damaged areas and items within 24-48 hours, and for a patch under about 10 square feet you can, in most cases, handle the job yourself. Nationally, Fixr puts a mold inspection at $450 to $800 and remediation in an average range of $1,500 to $9,000.
Key facts
- Georgia DPH
- Indoor air quality is not a regulated program
- Standards
- None enforceable, state or federal (DPH)
- Drying window
- 24-48 hours (EPA)
- DIY size
- Under about 10 sq ft, in most cases (EPA)
- Inspection, national
- $450–$800, average $500 (Fixr)
- Remediation, national
- $1,500–$9,000 average range (Fixr)
What Georgia's health department tells homeowners
The Department of Public Health's indoor air quality page is short and direct. In its words: "IAQ is not a regulated program and the branch does not offer any specific services related to mold growth indoors." It adds: "Mold inspections, testing or remediation practices have no enforceable state or federal standards." On causes, it says residential mold problems may result from inadequate ventilation, leaking plumbing, improper repairs or poor construction. For cleanup methods, the page sends readers to the EPA's A Brief Guide to Mold, Moisture, and Your Home.
The race against the first two days
That EPA guide says it is important to dry water-damaged areas and items within 24-48 hours to prevent mold growth, and that when wet or damp materials are dried within that window, in most cases mold will not grow. So the mold job really starts the day the leak is found: stop the water, pull out soaked rugs and padding, and get air moving.
Sizing it up
- Less than about 10 square feet (roughly a 3 ft. by 3 ft. patch): the EPA says in most cases you can handle it yourself.
- A lot of water damage, or growth over 10 square feet: the EPA points to its guide Mold Remediation in Schools and Commercial Buildings.
- Mold in the heating and cooling system: the EPA says not to run the HVAC system if you know or suspect it is contaminated with mold.
Want a price for your home? Call a local water damage crew for a written quote.
Phone line opening soonHiring when no standard applies
Since the health department says there are no enforceable standards for this work, the written quote is your main protection. Ask the company to spell out what it will test, what it will remove, how it will contain the area and how it will show the job is finished. If a plumbing leak fed the mold, get that fixed first and check the plumber on the Georgia Secretary of State license lookup under the Division of Master and Journeyman Plumbers.
National price ranges
| Service | Fixr, national |
|---|---|
| Mold inspection | $450 to $800, national average $500 |
| Mold remediation | Average range $1,500 to $9,000, national average cost $3,500 |
These are national figures from Fixr, not Atlanta quotes.
When you call: 4 questions to ask
- Is this clean water, or sewage that needs different handling?
- Which rooms and materials are wet, and how did you measure it?
- Will you work with my adjuster, or do I deal with the insurer?
- What's the daily charge for fans and dehumidifiers, and for how many days?
A fair written quote shows extraction, removed materials, daily equipment charges and dated photos, each on its own line. Check any contractor's license on the Georgia Secretary of State license lookup before work starts.
What happens when you call
- You're connectedStraight to a local water damage crew that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
Does Georgia set rules for mold inspectors or remediation companies?
Georgia's Department of Public Health says mold inspections, testing or remediation practices have no enforceable state or federal standards, and that indoor air quality is not a regulated program.
How soon does wet drywall need to be dried?
The EPA says to dry water-damaged areas and items within 24-48 hours to prevent mold growth.
Can I clean a small moldy spot myself?
If the moldy area is less than about 10 square feet, the EPA says that in most cases you can handle the job yourself.
Related guides
Sources
- Georgia Department of Public Health: Indoor air quality
- EPA: A Brief Guide to Mold, Moisture, and Your Home
- EPA: Mold cleanup in your home
- Georgia Secretary of State: About the Division of Master and Journeyman Plumbers
- Georgia Secretary of State: License lookup and verification
- Fixr: Mold inspection cost
- Fixr: Mold remediation cost
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.