Local Repair FinderAustin home repair guide

No hot water in Austin

Austin & Travis County · Reviewed November 2026 · Checked against 10 public sources

Leak, burst pipe or no hot water?

Talk to a local plumber now. Free, no obligation.

Phone line opening soon
  • Free to call
  • No obligation
  • Local Austin companies
  • Ask for a written quote

Have this ready when you call

  • Your address
  • Where the water is and whether the main is off
  • When it started

Test several taps first. Cold at only one points to that fixture; cold everywhere points to the water heater. For an electric unit, reset its breaker once. For a gas unit, see whether the stove or another gas appliance works, and leave the pilot and gas control to a plumber. Check the floor around the tank for water. Still cold after an hour? Book a plumber.

A hand turning the control dial on a gas water heater

Key facts

Step one
Try hot taps in two or three rooms
Electric heater
Reset its breaker one time
Gas heater
No relighting; a plumber handles pilot and gas control
Gas odor
Leave, then 911 and 800-959-5325
New tank-style gas heater
$1,000–$2,700 installed (national, Fixr)
Austin Energy rebate
$1,000, heat pump water heater
Texas license
State Board of Plumbing Examiners

Safe to wait or not?

Can waitThe tank is dry underneath, nothing smells of gas and the only trouble is cold showers. A day or two without hot water is a nuisance you can plan around.
Can't waitWater on the floor at the heater, a gas odor, scorch marks, or a breaker that will not stay on. Those need a plumber, the gas company or an electrician promptly.

Five safe checks

  1. Map the problem. Run the hot side at a kitchen tap, a bathroom tap and a shower. One cold fixture suggests a faucet cartridge or mixing valve, while every fixture cold puts the fault at the heater.
  2. Ask who used it last. Back-to-back showers, laundry and a dishwasher can empty a tank. Wait an hour with no hot water running and test again.
  3. Electric or heat pump unit: breaker. Find the one marked Water Heater. If it has tripped, push it Off and then On, once; if your lights are out as well, Austin Energy's outage number is 512-322-9100.
  4. Gas unit: look, don't light. See whether the stove burners or a gas dryer work. If nothing gas-fired runs, contact Texas Gas Service using your bill; if only the heater is out, leave the pilot and control knob alone and tell the plumber what you found.
  5. Inspect the floor and the display. Any water at the base changes this to a leaking water heater. On a tankless or heat pump model, copy down any error code shown on the screen.

When the checks don't fix it

Bring in a plumber if one of these applies:

  • An hour of recovery time produced no warm water.
  • The breaker trips a second time.
  • The water runs warm briefly and then turns cold on every tap.
  • Hot water looks rusty or smells bad.
  • The heater rumbles, pops or hisses.

Heating elements, thermostats and gas parts sit behind covers that should stay closed. If you smell gas at any point, leave the area immediately and call 911 and Texas Gas Service at 800-959-5325.

Want a price for your home? Call a local plumber for a written quote.

Phone line opening soon

Cold snap? Think pipes too

Camp Mabry's normal January low is 41.8 °F according to the National Weather Service's 1991-2020 normals, but hard freezes still happen. When one does arrive, a hot line running through an attic or outside wall can freeze and cut off hot water at some taps while the heater is fine. The frozen pipes page covers safe thawing.

Who should do the repair

The Texas State Board of Plumbing Examiners licenses plumbers statewide, and the TSBPE Public License Search lets you check a name. If the trouble turns out to be a tripping breaker and not the heater, electricians are licensed by the Texas Department of Licensing and Regulation.

A repair price for Austin is not something this guide has a verified figure for. Ask for the diagnosis and the total in writing before parts are ordered.

If it has to be replaced

Fixr's national range for a tank-style gas water heater is $1,000 to $2,700 installed. Treat it as a national yardstick; the water heater cost page explains what moves a quote.

Austin Energy pays a $1,000 rebate on a qualifying ENERGY STAR certified heat pump water heater in homes it serves with electricity. Gas water heaters are not eligible, and Texas Gas Service says its own rebate offerings are no longer available.

On permits, City of Austin pages do not name water heaters. The City's guidance is that work missing from its exempt list likely needs a permit, and a residential Plumbing Change Out permit is on its list of permit types.

What a repair usually costs

National ranges from cost publishers, not Austin quotes. The fault decides the price, so ask for it in writing before work starts.

JobNational rangeSource
Water heater repair$150 to $750Fixr, updated Aug 2025

When you call: 4 questions to ask

  1. Would a heat pump water heater qualify for the Austin Energy rebate here?
  2. Does this replacement need a City permit, and who pulls it?
  3. Which Texas State Board of Plumbing Examiners license do you hold?
  4. Is the diagnostic fee credited toward the repair?

A fair written quote shows the heater model, labor, any permit, removal of the old unit and written warranty terms. Check any contractor's license on the TDLR license search before work starts.

What happens when you call

  1. You're connectedStraight to a local plumber that serves your area and takes calls like yours.
  2. You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.

Common questions

Why do I suddenly have no hot water?

For an electric heater a tripped breaker is the first thing to rule out. For gas, the burner may have gone out or the gas supply may be interrupted. Heavy use can also simply drain the tank for an hour.

How long should I wait for hot water to come back?

After a tank has been emptied by heavy use, give it about an hour with no hot taps open. If there's no improvement, the heater has a fault.

Who do I call for no hot water in Austin, a plumber or the utility?

A plumber, in most cases. If the power is out, report it to Austin Energy at 512-322-9100.

Can I get a rebate on a new water heater in Austin?

Austin Energy offers $1,000 on a qualifying ENERGY STAR certified heat pump water heater. There is no current gas water heater rebate from Texas Gas Service.

Related guides

Sources

  1. National Weather Service Austin/San Antonio: January climate sheet, Camp Mabry (Normals 1991-2020)
  2. Austin Energy: Report outages
  3. Texas Gas Service: Safety
  4. Texas Gas Service: Energy Efficiency Program
  5. Texas State Board of Plumbing Examiners
  6. TDLR: Electricians
  7. Fixr: Gas water heater cost (national)
  8. Austin Energy: Heat pump water heater rebate
  9. City of Austin Development Services: Permit Like a Pro (Sept. 2025 presentation)
  10. City of Austin Development Services: Types of permits

Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.