The Ohio Department of Health's Healthy Homes Program puts it simply: if you discover mold in your home, locate and remedy the source of the water and remove the water-damaged materials, because mold will continue to grow as long as it has a source of water. EPA adds a deadline and a size line: dry wet areas within 24-48 hours, and a patch under about 10 square feet is in most cases a job you can handle yourself.
Key facts
- Ohio Department of Health
- Fix the water source, remove water-damaged materials
- Drying window (EPA)
- Within 24-48 hours
- Small patch (EPA)
- Under about 10 sq ft: in most cases DIY
- HVAC
- Don't run it if you suspect mold in it (EPA)
- Inspection
- $450–$800, national average $500 (Fixr)
- Remediation
- $1,500–$9,000 average range (Fixr, national)
Start with the water
The Ohio Department of Health's flood cleanup and mold page doesn't start with sprays or tests. It says to locate and remedy the source of the water and remove the water-damaged materials, and warns that mold will continue to grow as long as it has a source of water. So the leaking pipe, roof or drain comes first, the cleanup second.
The clock: 24 to 48 hours
EPA's brief guide to mold and moisture says it is important to dry water-damaged areas and items within 24-48 hours to prevent mold growth, and that if wet materials are dried in that window, in most cases mold will not grow. If the leak sat for days before you found it, that window has passed; check drywall, carpet pad and wood that stayed wet.
How big is it?
| What you see | EPA's guidance |
|---|---|
| Less than about 10 square feet (roughly a 3 ft. by 3 ft. patch) | In most cases, you can handle the job yourself |
| A lot of water damage, and/or more than 10 square feet of growth | EPA refers you to its guide Mold Remediation in Schools and Commercial Buildings |
Both lines come from EPA's Mold Cleanup in Your Home page. The same page says not to run the HVAC system if you know or suspect that it is contaminated with mold, since that could spread it through the building.
Want a price for your home? Call a local water damage crew for a written quote.
Phone line opening soonWhen to bring someone in
- The growth is bigger than EPA's 10 square foot line, or there was a lot of water.
- You suspect the furnace or AC ductwork, which EPA says not to run.
- The water source itself still needs a plumber or roofer.
- You'd rather not handle it, whatever the size.
Ask any mold company what it will remove, how it will contain the work area, and what it charges for an inspection versus the cleanup.
National costs
| Service | Fixr national figure |
|---|---|
| Mold inspection | $450 to $800, national average $500 |
| Mold removal | Average range $1,500 to $9,000, national average cost $3,500 |
Insurance
The Ohio Department of Insurance Homeowners Insurance Guide lists water damage (sewer backup or basement leak) among typical exclusions. It does not address mold, so ask your agent how your own policy treats it, and call your insurance company as soon as you can after the leak. ODI takes consumer questions at 800-686-1526.
When you call: 4 questions to ask
- Which rooms and materials are wet, and how did you measure it?
- Is this clean water, or sewage that needs special handling?
- Will you work with my insurer's adjuster, or should I?
- What is the daily charge for fans and dehumidifiers?
A fair written quote shows extraction, tear-out, daily equipment charges and dated photos, each on its own line. Check any contractor's license on the OCILB company licensee lookup before work starts.
What happens when you call
- You're connectedStraight to a local water damage crew that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
How fast can mold start after a leak?
EPA says to dry water-damaged areas and items within 24-48 hours to prevent mold growth; dried in that time, in most cases mold will not grow.
Can I clean mold myself in Columbus?
EPA says that for an area less than about 10 square feet, in most cases you can handle the job yourself. For more than that, or a lot of water damage, it points to its larger remediation guide.
What does mold removal cost?
Fixr's national average range for mold removal is $1,500 to $9,000, with a national average cost of $3,500. Inspection runs $450 to $800.
Related guides
Sources
- Ohio Department of Health: Emergency flood cleanup and mold
- EPA: A brief guide to mold, moisture and your home
- EPA: Mold cleanup in your home
- Fixr: Mold inspection cost
- Fixr: Mold remediation cost
- Ohio Department of Insurance: Homeowners Insurance Guide
- Ohio Department of Insurance: Consumer services
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.