Local Repair FinderFort Worth home repair guide

No hot water in Fort Worth

Fort Worth & Tarrant County · Reviewed November 2026 · Checked against 7 public sources

Leak, burst pipe or no hot water?

Talk to a local plumber now. Free, no obligation.

Phone line opening soon
  • Free to call
  • No obligation
  • Local Fort Worth companies
  • Ask for a written quote

Have this ready when you call

  • Your address
  • Where the water is and whether the main is off
  • When it started

First find out whether every tap runs cold or only one. For an electric heater, reset its breaker once. For a gas heater, see whether other gas appliances still work, and leave the pilot and gas control to a plumber. Tankless units often show an error code worth writing down. If hot water is still missing an hour later, call a plumber. Repairs to a water heater need a Fort Worth plumbing permit.

A hand turning the control dial on a gas water heater

Key facts

First five minutes
One tap or all; breaker; other gas appliances
Next hour
Recovery time, tankless code, leaks, outlet reset
Gas smell
Leave, then 911 and Atmos Energy, 866.322.8667
Permit for the fix
Plumbing permit (City of Fort Worth)
License to ask for
TSBPE plumbing license
Gas tank replacement
$1,000–$2,700 installed (national range, Fixr)

First five minutes

  1. Try three faucets. Kitchen, a bathroom and the tub. Cold at a single fixture is a faucet or valve problem at that spot. Cold everywhere is the heater.
  2. Electric heater: breaker. Look for the breaker labelled water heater. If it has tripped, set it fully off and then on, a single time.
  3. Gas heater: check a burner on the stove. If the range lights normally, gas is reaching the house and the fault is at the heater. If no gas appliance works and there is no odor, your gas provider's customer service is the next call.
  4. Any gas smell stops the list. Leave the area, then from a safe distance call 911 and Atmos Energy at 866.322.8667.

Next hour

  1. Allow for recovery. Back-to-back showers, laundry and a dishwasher can simply empty a tank. Give it most of an hour with no hot water use, then test again.
  2. Read a tankless display. A code on the screen or a blinking light is the unit telling you why it stopped. Copy it down, along with the brand and model on the label.
  3. Press the reset on the outlet. A tankless or power-vented heater plugs into a wall outlet. If that outlet has Test and Reset buttons, press Reset and see whether the unit wakes up.
  4. Walk around the tank. Damp flooring, drips at the top connections or rust streaks down the side change the diagnosis. See the leaking water heater steps.
  5. Think about the weather. During a freeze, a cold-only house can be a frozen supply line and not the heater at all. The frozen pipes page covers that.

Want a price for your home? Call a local plumber for a written quote.

Phone line opening soon

Do and don't

DoDon't
Reset the water heater breaker one timeFlip it repeatedly when it trips again
Write down a tankless error code and the model numberLight a pilot or adjust the gas control
Wait out a recovery period after heavy useUnscrew the access covers on an electric tank
Ask the plumber for the price in writing firstRaise the temperature dial to make up for a fault

Stop and call a pro when

  • The breaker for the heater trips again after your reset.
  • A gas heater has no flame and the stove works fine.
  • The tankless code returns after the unit restarts.
  • Water is lukewarm at best and runs out within minutes.
  • You see water at the base of the tank.

Before a repair starts

Permit

Fort Worth does not limit its plumbing permit to replacements. The wording on the City's residential permit page covers repairing plumbing as well as installing, changing or moving it, and it mentions water heaters by name. Ask whether the job you are being quoted needs one and who pulls it.

License

The Texas State Board of Plumbing Examiners licenses the trade. Its Public License Search is where a license number can be checked. There is no separate Fort Worth plumber license to look for.

Gas contact

Atmos Energy's Mid-Tex Division is the natural gas utility for the Fort Worth area. Its emergency number, 866.322.8667, is for suspected leaks; use it together with 911 and from outside the house.

Price and rebates

This guide has no Fort Worth price for a heating element, thermostat or igniter repair. If the plumber recommends replacement, Fixr's national range for a tank-style gas unit is $1,000 to $2,700 installed. Atmos Energy rebates on qualifying natural gas models run from $100 for a storage tank rated 0.68 UEF or higher up to $300 for an ENERGY STAR tankless unit at 0.95 UEF or higher. Full tiers are on the rebates page.

What a repair usually costs

National ranges from cost publishers, not Fort Worth quotes. The fault decides the price, so ask for it in writing before work starts.

JobNational rangeSource
Water heater repair$150 to $750Fixr, updated Aug 2025

When you call: 4 questions to ask

  1. Is there a call-out charge, and is it folded into the job if I go ahead?
  2. Will you give me one fixed price before any work starts?
  3. Does your price cover the Fort Worth plumbing permit?
  4. Which Texas State Board of Plumbing Examiners license do you hold, and under what number?

A fair written quote shows materials, labor, the permit, disposal of the old unit, and written warranty terms. Check any contractor's license on the TDLR license search before work starts.

What happens when you call

  1. You're connectedStraight to a local plumber that serves your area and takes calls like yours.
  2. You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.

Common questions

Why do I suddenly have no hot water?

For an electric heater, a tripped breaker is the first thing to rule out. For gas, the burner may not be lighting. Heavy use can also drain a tank; wait close to an hour and test again.

Should I relight the pilot light on my water heater?

This guide does not walk homeowners through pilots or gas controls. If the stove lights but the heater has no flame, call a licensed plumber.

Does a water heater repair need a permit in Fort Worth?

The City of Fort Worth's rule covers changing, installing, moving or repairing plumbing, including water heaters, under a plumbing permit.

How do I check a plumber's license in Texas?

Use the Public License Search run by the Texas State Board of Plumbing Examiners. Ask the plumber for the license number first.

Related guides

Sources

  1. City of Fort Worth Development Services: Residential permit information
  2. Texas State Board of Plumbing Examiners
  3. TSBPE Public License Search
  4. Atmos Energy: Texas service territory
  5. Atmos Energy: Gas safety
  6. Fixr: Gas water heater cost (national)
  7. Atmos Energy: Mid-Tex appliance rebate program

Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.