Local Repair FinderHouston home repair guide

Water heater leaking: first steps in Houston

Houston & Harris County · Reviewed November 2026 · Checked against 8 public sources

Close the cold-water valve on the pipe feeding the heater; that stops new water entering the tank. For an electric unit, switch off its breaker. Then contain the puddle and look for where the water starts. A drip at a pipe fitting can often be repaired, but water from the tank body means replacement, which runs $1,000 to $2,700 on national figures and needs a City plumbing permit.

Key facts

1. Cold supply valve
Turn it off at the top of the heater
2. Electric unit
Switch off its breaker
3. Gas smell
Leave; CenterPoint 713-659-2111 and 911
Replacement permit
City plumbing permit required
Who pulls it
A master plumber registered with the City of Houston
License board
Texas State Board of Plumbing Examiners
Tank water heater
$1,000–$2,700 installed (national, Fixr)
  1. Shut the cold supply. Follow the pipe that enters the top of the tank to its valve and turn the handle clockwise, or swing a lever handle a quarter turn. If that valve is stuck or missing, close the main water valve for the house instead.
  2. Cut the power on an electric heater. Find the breaker labelled for the water heater and switch it off, provided you can stand somewhere dry to do it. On a gas heater, leave the gas controls untouched.
  3. Water supply closed and the heater still dripping from the tank? Call a local plumber, then carry on down the list.

    Phone line opening soon

    Have this ready when you call

    • Your address
    • Where the water is and whether the main is off
    • When it started
  4. Smell gas? Go. Walk out, use no switches or phones on the way, and call CenterPoint Energy at 713-659-2111 and 911 from a safe distance.
  5. Catch and contain. Slide a pan or bucket under the drip and lay towels to keep water from running toward walls, carpet or the next room. In an attic installation, check the ceiling below.
  6. Trace the source with your eyes. Top fittings, the relief valve pipe on the side, the drain spout near the bottom, or the seam of the tank itself: note which one is wet. Don't tighten, cap or plug anything.
  7. Take photos. Get the heater's label, the leak point and any wet flooring or drywall before cleanup.
Water pooling in a drain pan around the base of a water heater

Stop and call a pro when

  • Water is seeping from the tank body or pooling from underneath.
  • The relief valve pipe is discharging hot water or steam.
  • You closed the supply and the leak has not slowed.
  • The unit sits in an attic or closet where water is already in a ceiling or wall.
  • There is rust-coloured water, popping noises or scorch marks.

Never block the relief valve or its pipe; it is a safety device. Draining the tank, swapping valves and reconnecting gas or wiring are plumber's tasks.

Replacing one in Houston takes a permit

The Houston Permitting Center states that a plumbing permit is required for the replacement and installation of water heaters, and that the permit must be obtained by a master plumber registered with the City of Houston. Plan review is not needed for a single-family home. One exception exists for people doing their own work: the Homeowner's Plumbing Permit is open to someone who owns and occupies the property, has it registered as a homestead, and performs the plumbing personally, with the work inspected. Offices and details are on the permits page.

The license to ask about

Plumbers in Texas are licensed by the Texas State Board of Plumbing Examiners. Ask for the license number when you book and run it through the TSBPE Public License Search.

National price range

Fixr's national range for a tank-style gas water heater, installed, is $1,000 to $2,700. Treat it as a national yardstick, since no Houston-specific figure is available here, and ask whether the quote includes the permit and hauling the old tank away. No current CenterPoint rebate for water heaters appears on an official page; ask CenterPoint if one applies. The water heater cost page has more.

Will insurance help?

According to the Texas Department of Insurance, most home policies cover a sudden and accidental release of water but not a continuous leak. A tank that lets go overnight and a fitting that has wept for months are treated differently, so report damage promptly. If the water reached drywall or flooring, go to water damage first steps.

What a repair usually costs

National ranges from cost publishers, not Houston quotes. The fault decides the price, so ask for it in writing before work starts.

JobNational rangeSource
Water heater repair$150 to $750Fixr, updated Aug 2025

When you call: 4 questions to ask

  1. Who pulls the plumbing permit the City requires for a water heater?
  2. May I see your Texas State Board of Plumbing Examiners license?
  3. If the heater sits in the garage or attic, what changes in the price?
  4. Is the trip fee credited if I go ahead with the job?

A fair written quote shows the heater, labor, the plumbing permit, removal of the old tank and the written warranty. Check any contractor's license on the TDLR license search before work starts.

What happens when you call

  1. You're connectedStraight to a local plumber that serves your area and takes calls like yours.
  2. You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.

Want a price for your home? Call a local plumber for a written quote.

Phone line opening soon

Common questions

Can a leaking water heater be repaired?

Sometimes. Leaks at the pipe connections, the drain spout or the relief valve are often fixable. Water coming through the tank wall itself is not; that tank needs replacing.

Is a leaking water heater an emergency?

Treat it as urgent. Close the cold supply valve and cut power to an electric unit. A small drip can wait for a scheduled visit once it is contained; a growing pool or water in a ceiling can't.

Is a City permit part of swapping a water heater in Houston?

Yes. The City requires a plumbing permit for water heater replacement and installation, obtained by a master plumber registered with the City of Houston.

What does a new water heater cost?

On Fixr's national figures, a tank-style gas unit comes to $1,000 to $2,700 with installation. Those numbers are national, not specific to Houston.

Related guides

Sources

  1. Houston Permitting Center: Water heater permit
  2. Houston Permitting Center: Homeowner's plumbing permit
  3. Texas State Board of Plumbing Examiners
  4. TSBPE Public License Search
  5. Fixr: Gas water heater cost (national)
  6. CenterPoint Energy: What to do if you smell gas
  7. CenterPoint Energy: Natural gas safety (Houston service area)
  8. Texas Department of Insurance: Homeowners insurance guide

Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.