Local Repair FinderNashville home repair guide

Panel and service upgrades in Nashville

Nashville & Davidson County · Reviewed November 2026 · Checked against 8 public sources

Breaker trouble, a burning smell or a panel upgrade?

Talk to a local electrician now. Free, no obligation.

Phone line opening soon
  • Free to call
  • No obligation
  • Local Nashville companies
  • Ask for a written quote

Moving up to 200 amp service typically costs $1,800 to $4,500, per Fixr's national figures; a Nashville-specific number wasn't available. Metro's permit chart requires a permit when service size increases, and Metro treats electrical work as a separate permit from building work. Tennessee says a local electrical license is required whatever the size of the job.

Closed electrical panel on a basement wall with metal conduit running into the top

Key facts

200 amp service upgrade
$1,800–$4,500 (national, Fixr)
Permit
Service size increase: yes (Metro's permit chart); confirm a same-size swap
Metro Permit Issuance
615-862-6517
Metro Electrical Inspections
615-862-6528
State LLE license
Work under $25,000, where no local licensing is in place
Local license
Required regardless of project amount

Why the price varies

Fixr's national figure for upgrading to 200 amp service is $1,800 to $4,500. Where a Nashville job lands depends on:

  • Service size now and after. Going from an older, smaller service to 200 amps is more work than replacing a panel at the same size.
  • Meter base and service entrance. If these need replacing too, the job grows.
  • Circuits and code fixes. Moving circuits, adding breakers or correcting problems found in the old panel adds time.
  • Permit and inspection. Ask whether the Metro permit fee is in the quote.

Want a price for your home? Call a local electrician for a written quote.

Phone line opening soon

What Metro requires

Metro's permit chart lists "electrical service, increase size" as needing a permit. Metro's current renovation page also lists relocating a fixture, switch or outlet as permit work. Neither has a row for a like-for-like panel replacement, and the chart was last revised in 2011, so call Metro Codes Permit Issuance at 615-862-6517 or Electrical Inspections at 615-862-6528 before work begins.

Metro's self permit lets an owner-occupant of a single-family home pull a building permit, but its affidavit says separate permits are required for electrical, plumbing and gas/mechanical work. Metro doesn't publish homeowner electrical permit rules on the pages used here, so ask Codes whether you can pull one yourself.

Licensing

Tennessee's LLE license is only required where the total cost is under $25,000, and the state says the local license is required regardless of project amount. Metro Nashville runs its own electrical licensing, and the state LLE isn't accepted where a local jurisdiction has licensing and inspections in place. For $25,000 and up, a state contractor license applies. The state license search covers state licenses.

When it's worth looking at

Upgrades usually come up when adding a heat pump, an electric water heater, a car charger or a workshop. With TVA EnergyRight paying $800 or $500 on qualifying heat pumps and $900 off a qualifying heat pump water heater, it can make sense to price the electrical work and the equipment together. See the rebates page.

When you call: 4 questions to ask

  1. Which local and state electrical licenses do you hold?
  2. Will you get the Metro permit for increasing the service size?
  3. Is there room in the panel for a heat pump or charger later?
  4. Is the trip charge credited on the job?

A fair written quote shows the panel, labor, the permit and inspection, with extra wiring priced separately. Check any contractor's license on the Tennessee license search before work starts.

What happens when you call

  1. You're connectedStraight to a local electrician that serves your area and takes calls like yours.
  2. You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.

Common questions

How much is a 200 amp upgrade?

Fixr's national figure is $1,800 to $4,500. The existing service, meter base condition and circuit work decide where your quote falls.

Does Metro Nashville require a permit for a service upgrade?

Yes. Metro's permit chart lists increasing service size as needing a permit. For a same-size panel swap, ask Metro Codes, because the chart doesn't list it and was issued in 1989 and last revised in 2011.

Can I pull my own electrical permit?

Metro's self permit covers building work for owner-occupants of single-family homes, and its affidavit says electrical work needs a separate permit. Ask Metro Codes whether a homeowner can get that permit.

Related guides

Sources

  1. Fixr: Electrical panel upgrade cost (national)
  2. Metro Codes: Building Permit Required? chart
  3. Metro Codes: Renovate a single-family residence
  4. Metro Codes: Residential building permits (self permits)
  5. Metro Codes and Building Safety: Contact information
  6. Tennessee Department of Commerce and Insurance: Who needs a Limited Licensed Electrician (LLE) license
  7. TVA EnergyRight: Residential rebates
  8. TVA EnergyRight: Water heating rebates

Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.