A patch is the smaller bill: Fixr's national range is $1,280 to $2,380 to repair 100 sq.ft., average $1,830. Re-siding a whole house runs $8,500 to $20,000 nationally, about $14,500 for 2,000 sq.ft. These are not Raleigh bids.

Key facts
- Repair, 100 sq.ft. (national)
- $1,280–$2,380; average $1,830
- Minimum repair charge
- Typically $244–$454
- Full re-side (national)
- $8,500–$20,000
- Removal and disposal
- $1,000–$2,500
- Permit and inspection fees (Fixr, national)
- Typically $150–$1,500
Patch or re-side?
Fixr's national repair figures: $1,280 to $2,380 for 100 sq.ft., an average of $1,830, and a minimum charge that typically runs $244 to $454. A full replacement is a different scale of job, at $8,500 to $20,000 nationally. Get both prices if only part of the house is affected.
Material prices, per sq.ft. (national)
Fixr's numbers, January 23, 2026, ranked from the lowest starting price:
- Engineered wood, $2 up to $10
- Wood, $2 up to $15
- Aluminum, $3 up to $10
- Vinyl, $3 up to $12
- Fiber cement, $5 up to $14
- Stucco, $7 up to $17
Want a price for your home? Call a local siding contractor for a written quote.
Phone line opening soonTear-off and fees
Fixr adds $1,000 to $2,500 to remove and dispose of the old siding, depending on how heavy it is and its condition. It also says permit and inspection fees typically range from $150 to $1,500, depending on local regulations. In North Carolina, though, siding replacement on a single-family home at $40,000 or less is exempt from a building permit when the statute's conditions are met, so ask whether your quote includes a fee at all.
Big jobs
Once a project goes above $40,000, the state permit exemption no longer applies. At $40,000 or more, G.S. 87-1(a) also deems the contractor a general contractor. Historic properties have their own step; see the siding hub.
When you call: 4 questions to ask
- Is my house a Raleigh historic property, and will you help with the Certificate of Appropriateness?
- Will the total stay at or under $40,000?
- Can you price a repair as well as a full re-side?
- Are you certified for lead-safe work if the paint predates 1978?
A fair written quote shows the siding material, the square feet covered, tear-off and hauling, any permit fee, and the total. Check any contractor's license on NC Licensing Board for General Contractors license search before work starts.
What happens when you call
- You're connectedStraight to a local siding contractor that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
What does a siding repair cost in Raleigh?
Only national figures are available: Fixr says $1,280 to $2,380 for 100 sq.ft., with minimum charges of $244 to $454.
Which materials start cheapest?
On Fixr's national table, engineered wood and wood both start at $2 per sq.ft.
Should a Raleigh quote include a permit fee?
Not always. North Carolina exempts siding replacement on a single-family home of $40,000 or less from a building permit when the statute's conditions are met.
How much is tear-off?
Fixr's national range is $1,000 to $2,500.
Related guides
Sources
- Fixr: Siding repair cost (national)
- Fixr: Siding replacement cost (national)
- North Carolina General Statute 160D-1110: Building permits
- North Carolina General Statute 87-1: General contractor defined
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.