The clock starts with the leak: the EPA says to dry water-damaged areas and items within 24-48 hours to prevent mold growth. Once mold is visible, measure it. Below about 10 square feet the EPA says that in most cases you can handle it yourself. Fixr's national figures are $450 to $800 for a mold inspection and an average range of $1,500 to $9,000 for removal.
Key facts
- Dry within
- 24-48 hours (EPA)
- About 10 sq ft or less
- In most cases a DIY job (EPA)
- Lots of water or over 10 sq ft
- EPA's schools and commercial buildings guide
- Suspect mold in the ducts
- Don't run the HVAC (EPA)
- Insurance questions
- Utah Insurance Department, 801-957-9200
- Inspection
- $450–$800, national average $500 (Fixr)
- Removal
- $1,500–$9,000 average range, national average $3,500 (Fixr)
Drying comes first
Stop the water before anything else: a ceiling drip, a backed-up drain or a frozen pipe each has its own page (ceiling leak, sewer backup, frozen pipes). The EPA's moisture guide notes that if wet or damp materials are dried 24-48 hours after a leak or spill, in most cases mold will not grow.
Sizing it up
| What you see | EPA guidance |
|---|---|
| Less than about 10 square feet (roughly 3 ft. by 3 ft.) | In most cases, you can handle the job yourself |
| More than 10 square feet, or a lot of water damage | See EPA's Mold Remediation in Schools and Commercial Buildings |
| Furnace, AC or ducts may be contaminated | Do not run the HVAC system |
Source: the EPA's Mold Cleanup in Your Home.
Want a price for your home? Call a local water damage crew for a written quote.
Phone line opening soonInsurance
Read the mold terms in your own policy before you sign for remediation. If an insurer's handling of the claim seems wrong, the Utah Insurance Department's consumer services line is 801-957-9200 in the Salt Lake City area or 1-800-439-3805 toll-free in Utah, 8:00 a.m. to 5:00 p.m., Monday to Friday.
National costs
Fixr's mold inspection figure is $450 to $800, with a national average of $500. For removal, Fixr's average range is $1,500 to $9,000 and its national average cost is $3,500. Neither is a Salt Lake City price.
When you call: 4 questions to ask
- Will you take moisture readings every day and give me a written drying log?
- Do you bill my insurer directly, and what will I owe up front?
- Is the rebuild (drywall, flooring, paint) included, or is that another company?
- What will you remove, and can I see moisture readings before you cut?
A fair written quote shows extraction, materials removed, drying equipment days itemized, and photos for your claim. Check any contractor's license on Utah's DOPL lookup before work starts.
What happens when you call
- You're connectedStraight to a local water damage crew that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
How long do I have before mold grows?
The EPA says to dry water-damaged areas and items within 24-48 hours to prevent mold growth.
When is mold too big to clean myself?
The EPA's cut-off is about 10 square feet. Above that, or after a lot of water damage, it points to its guide Mold Remediation in Schools and Commercial Buildings.
How much is a mold inspection?
Fixr's national figure is $450 to $800, with a national average of $500.
Related guides
Sources
- EPA: A brief guide to mold, moisture and your home
- EPA: Mold cleanup in your home
- Utah Insurance Department: Complaints and consumer services
- Fixr: Mold inspection cost
- Fixr: Mold remediation cost
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.