Two valves come first: the cold-water inlet above the tank, then the fuel, meaning the gas knob turned to Off or the heater's circuit switched off at the panel. After that, the spot the water is coming from decides whether you're paying for a repair or a new heater. A new heater inside Greenville city limits isn't on the City's exception list, so plan on a permit; confirm with 864-467-4505; when the swap happens as an emergency, the paperwork follows by the next working business day.
Key facts
- First valve
- Cold-water inlet on the pipe into the top
- Second
- Gas knob to Off, or the heater's breaker off
- Gas odor
- Walk out; 911 and Piedmont Natural Gas, 800.752.7504
- Shell or seam weeping
- Plan on a new heater
- City permit
- New heater not on the exception list, so plan on one; after an emergency swap, file by the next working business day
- Tank-style gas heater
- $1,000–$2,700 (national average range, Fixr)
- Plumber's credential
- RBP, SC LLR Residential Builders Commission
- Inlet valve. Follow the cold pipe into the top of the heater and turn its valve until it won't go further. That stops the tank refilling as it drains.
- Fuel. On a gas model, set the knob on the control to Off. On an electric model, flip its double breaker at the panel while standing on dry ground. Any whiff of gas changes the plan: walk out, and from a distance call 911 and Piedmont Natural Gas at 800.752.7504.
Inlet and fuel both shut, yet drops keep coming? Ring a Greenville plumber now, and carry on below while you talk.
Phone line opening soonHave this ready when you call
- Your address
- Where the water is and whether the main is off
- When it started
- Contain the spread. Shift stored boxes, rugs and anything cardboard away from the base, then lay towels or set a low tray to collect drips.
- Trace it. Wipe the outside dry and watch where fresh drops show up first.
- Pictures. The rating plate, the drip, and the floor or drywall around it. Your insurer and your plumber will both want them.

Reading the drip
| Where the drops start | What it tends to mean |
|---|---|
| Threaded joints where pipes enter the top | Connection work; the heater itself may be fine |
| Temperature and pressure relief valve, or the pipe running down from it | The valve is releasing or failing; a plumber's call, and never plug it |
| Hose-thread drain valve near the floor | A worn valve or a cap that's worked loose |
| The shell, a seam, or a puddle with no other source | Corrosion through the tank; budget for a new heater |
Greenville paperwork for a new heater
Greenville's code exceptions for plumbing are written narrowly, including stopping leaks, repairing leaks in pipes, valves or fixtures, and clearing stoppages. Retightening a joint sits inside that. A whole new heater isn't on the City's exception list, so plan on a permit; confirm with 864-467-4505. The permit is filed with the City, either through the online Permit Center or with the Building Codes and Permit Center (864-467-4505). A heater that had to go in over a weekend is still covered: the City's emergency rule, on its Do You Need A Permit? page, moves the application to the next working business day.
Budget and credentials
Fixr's national average range for a tank-style gas heater is $1,000 to $2,700 installed; a Greenville-only figure isn't available. Residential plumbers in South Carolina carry the RBP credential from the SC LLR Residential Builders Commission, and the commission's lookup shows whether a company's is active.
What a repair usually costs
National ranges from cost publishers, not Greenville quotes. The fault decides the price, so ask for it in writing before work starts.
| Job | National range | Source |
|---|---|---|
| Water heater repair | $150 to $750 | Fixr, updated Aug 2025 |
When you call: 4 questions to ask
- Will you pull the City permit for the new water heater, including after an emergency swap?
- Is the leak on my side of the Greenville Water meter setter, or the utility's?
- What's your Residential Specialty Plumbing (RBP) license number?
- Does the service-call fee count toward the repair?
A fair written quote shows the heater or parts, labor, the permit, haul-away of the old tank and the written warranty. Check any contractor's license on the SC LLR Residential Builders Commission licensee lookup before work starts.
What happens when you call
- You're connectedStraight to a local plumber that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Want a price for your home? Call a local plumber for a written quote.
Phone line opening soonCommon questions
Which valve do I close when the water heater starts leaking?
The one on the cold-water pipe feeding the top of the tank. Then set the gas knob to Off, or switch off the heater's breaker if it's electric.
Does a dripping relief valve mean the heater is finished?
Not necessarily. The valve may be releasing as designed or may be failing, and a plumber should check it. Water coming from the shell or a seam is the sign the tank itself has failed.
Will the City of Greenville still want a permit if the heater was swapped on a weekend?
Plan on it. A new heater isn't on the City's exception list, and for emergency replacements the City's rule is that the permit application goes in within the next working business day.
Related guides
Sources
- City of Greenville: Do You Need A Permit?
- Piedmont Natural Gas: Natural gas safety
- Fixr: Gas water heater cost
- SC LLR Residential Builders Commission: Licensure
- SC LLR Residential Builders Commission: Licensee Lookup
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.